Standard configuration:
Electrophoresis tank cover (including wires): 1 set
Electrophoresis tank lower shell: 1 piece
Electrode core: 1 set
Electrode core: 1 set
Gel glass thick plate: 5 pieces
Gel glass sheet: 5 pieces
10 tooth sample combs: 5 pieces
Connected adhesive seat: 2 pieces
Glue frame: 4 pieces
Single rubber baffle: 1 piece
Rubber shovel: 1 piece
Cooling glass frame: 1 piece
Product parameters:
Product model: YT-mini4
Number of gel: 1-4
Gel thickness: 0.75, 1, 1.5mm (optional)
Optional sample comb teeth: 10, 15 teeth
Glass size: Short glass board (10.1x7.3cm); Long glass plate (10.1x8.2cm)
Glue size: Hand filled glue (8.3x7.3cm); Prefabricated adhesive (8.6x6.8cm)
Ye Tuo YT-mini4 Mini Vertical Electrophoresis Tank
Model: YT-mini4
Product Overview:
Four pieces of small gel electrophoresis shall be completed within one hour. The edge sealing strip shall be permanently fixed on the glass plate to ensure accurate alignment and prevent glue leakage. The electrophoresis comb made of special materials will not inhibit the ridge built in the gel polymerization reaction to avoid air contact. The parallel glue filling rack can see two pieces of poured gel at the same time. The spring rod and rubber pad cooperate to produce good sealing performance. The glue making frame with a cam ensures accurate alignment of any horizontal plane
Features of Ye Tuo YT-mini4 Mini Vertical Electrophoresis Tank Product
The long glass plate with edge sealing gasket is thickened to prevent the glass plate from breaking
● Parallel and integrated gel filling rack, which can observe two gel at the same time
99.99% high-purity platinum electrode wire for optimal conductivity
