Product parameters
Model: YTST-12 (circular)
Number of samples processed: 12 independently controlled
Heating method: circular water bath
Test tube usage range: 10-28.2mm
Sample tray lifting height: 0-150mm
Sample disk rotation space: 360 ° C
Temperature control accuracy: ± 1 ° C
Temperature control range: room temperature~100 ° C
Temperature control mode: 4-digit display/PID adjustment/over temperature alarm
Timing time: 0-99h59min
Gas flow rate: controllable, 0-15L/min
Nitrogen consumption: 330ml/min/sample
Power: 1000w
Weight: 10KG
Product parameters
Model: YTST-12 (circular)
Number of samples processed: 12 independently controlled
Heating method: circular water bath
Test tube usage range: 10-28.2mm
Sample tray lifting height: 0-150mm
Sample disk rotation space: 360 ° C
Temperature control accuracy: ± 1 ° C
Temperature control range: room temperature~100 ° C
Temperature control mode: 4-digit display/PID adjustment/over temperature alarm
Timing time: 0-99h59min
Gas flow rate: controllable, 0-15L/min
Nitrogen consumption: 330ml/min/sample
Power: 1000w
Weight: 10KG
Product features of Ye Tuo YTST-12 water bath nitrogen blowing instrument (circular)
Each air needle channel on the distribution room can be combined or used separately, and each air needle can be switched on and off separately. The height of the distribution room can be adjusted as needed.
Each gas flow rate can be individually adjusted to meet the different needs of users. At the same time, it overcomes the weakness of different gas flow rates in each gas path of the non adjustable nitrogen blowing instrument.
The self balancing suspension lifting system is cleverly designed to make the height adjustment of the distribution room more flexible.
Digital temperature controller, dual digital display, adjustable using PID technology and able to achieve over temperature alarm.
Components that may come into contact with solvents are made of 316 stainless steel material, which has a long service life and is easy to clean.
The entire machine can be placed in a fume hood for use.
Each model can be optionally equipped with a gas regulator.
The standard specification for heating blocks is generally aperture φ 11-29mm, users of other specifications can pre order their aperture and form.
