Model: YTQM-0.4L
Specification: 0.4L
Ball milling tank: 4
Can be equipped with ball milling tank: 50ml/100ml
Equipment power supply: 220V-50HZ/110V-60HZ
Motor power: 0.37/0.75kw
Speed regulation method: variable frequency speed regulation
Total time set for operation: 0-3000min
Forward and backward alternating running time: 0-3000min
Speed (self rotation): 50-600rpm
Noise<db: 60db
Equipment weight: 20kg
Equipment volume: 590 * 380 * 470 (mm)
Transmission method: gear transmission
Working mode: Two or four ball milling tanks working simultaneously
Maximum sample size: two-thirds of the volume of the ball milling tank
Feed particle size: soil material ≤ 10mm, other materials<3mm
Discharge particle size: minimum up to 0.1um
Speed ratio (revolution: rotation): 1:2 (0.4L, 2L, 4L)
Control method: variable frequency stepless speed regulation, program control, manual and automatic
timing for forward and reverse rotation, and timed shutdown
Z continuous working time (full load): 48 hours
Product Usage
The QM series planetary ball mill is controlled by AC motor frequency conversion program. It is equipped with four ball milling tanks on a turntable. When the turntable rotates, the central axis of the ball milling tank moves in a planetary manner. The ball in the tank grinds and mixes samples in a high-speed motion. It can be used for medicine, biological samples, inorganic compound substances, minerals, organic substances, as well as paper, chips, polymers, etc.
Product Features
1.Stable speed and finer grinding particles
2. The appearance of the box is flipped, easy to operate, and the cover is equipped with a safety switch for safety and reliability
3. Adjustable speed and stable operation, capable of grinding and mixing products with different particle sizes and materials using both dry and wet methods. Grinding products with a small particle size of up to 0.1 micrometers (i.e. 1.0X10-4MM)
4. Four cans of grinding can obtain four samples at a time
5. The pneumatic support rod is firmly supported
6. The same process conditions, same materials, four cans of grinding, and multiple tests have consistent results, with good repeatability and consistency
7. No need to replace the planetary pulley belt, greatly reducing labor intensity
