Model: yt-20tl
Temperature range: 0 ℃ ~ 100 ℃ (tested at ambient temperature ≤ 20 ℃)
Power: 250W
Time setting: 1min-100h
Module temperature uniformity: ≤± 0.3 ℃
Temperature control accuracy: ± 0.5 ℃
Display accuracy: 0.1 ℃
Oscillation speed: 200 ~ 1800rpm
Oscillation amplitude: 2-3mm (horizontal rotation)
Heating time: ≤ 15min (25 to 100 ℃)
Cooling time: ≤ 25 minutes (from 20 ℃ to 0 ℃) (detected when the ambient temperature is 20 ℃)
Multipoint operation: supported (up to 5 points)
Dimension (mm): 270 * 190 * 190 (mm)
Net weight: 9.5kg
Power supply: AC220V / 120V, 50 / 60Hz
The constant temperature mixer integrates the three functions of mixing, oscillation and incubation heating and the concept of intelligent operation. It can not only mix all kinds of commonly used laboratory consumables such as microtubules, PCR plates, deep well plates and microplates, but also heat and incubate all kinds of modules. Product features
1. LCD display, man-machine friendly touch operation interface.
2. Power failure recovery function. Power failure recovery can automatically resume operation according to the original setting program.
3. Microprocessor controls temperature, speed and time, with good temperature control linearity, accurate oscillation speed and small fluctuation.
4. Brushless DC motor drive, long life and maintenance free.
5. The metal module can be easily replaced, cleaned and disinfected.
6. The use of metal modules can protect the sample from contamination.
7. It is equipped with timing function, and the culture time can be set arbitrarily for 0 ~ 100 hours.
8. Temperature deviation calibration function; Built in overtemperature protection device.
9. Automatic fault detection and buzzer alarm function.
10. Beautiful appearance, blue liquid crystal display, real-time parameter information, touch operation interface.
