Product Parameters:
Model: SX2-5-12N/NP
Display mode: LCD
Temperature control range: RT~1200 ° C
Recommended operating temperature: ≤ 1000 ° C
Temperature resolution: 1 ° C
Temperature fluctuation: ± 1 ° C (test point 600 ° C)
Temperature uniformity: ± 3 ° C (test point 600 ° C)
Heating rate: Approximately 15 degrees per minute below 700 ° C
Working dimensions (DxWxH): 300x200x120 (mm)
Dimensions (DxWxH): 610x470x640 (mm)
Net weight/gross weight: 65KG/80KG
Capacity: 7.2L
Input power: 5kw
Power supply voltage: 220V
Note: NP is programmable for 9-stage program heating, N is non programmable
Yetuo SX2-5-12N/NP integrated box type resistance furnace
Model: SX2-5-12N/NP
Product Overview:
This furnace is a universal equipment for laboratories, which can be used for sintering, heating, and processing in coal, chemical, building materials, power, metallurgy, geological exploration, and scientific research laboratories;
Product features of Yetuo SX2-5-12N/NP integrated box type resistance furnace
Clever furnace door design makes door opening operation easy and ensures that high-temperature hot air inside the furnace does not leak out;
Installing the controller under the furnace door can save space and meet various fast sintering requirements;
Microcomputer PID controller, easy to operate, accurate, reliable, and comprehensive temperature control;
Corrosion resistant lightweight furnace ensures long-term use;
A good door seal reduces heat loss and increases the uniformity of temperature inside the furnace;
