1、 Safe operation

1. Before operating a mold incubator, it is necessary to first confirm whether the exhaust system in the laboratory is normal and whether the air cleanliness in the laboratory meets the requirements;

2. Before operation, it is necessary to confirm whether the power cord, plug, electrical appliances, etc. are safe;

3. When operating, it is necessary to wear laboratory clothing and protective equipment such as masks and gloves;

4. When operating, pay attention to the cleanliness of the laboratory to avoid bacterial contamination;

5. Before operation, it is necessary to confirm whether the temperature, humidity, and oxygen concentration in the incubator meet the requirements, as well as whether the air is clean;

6. When operating, pay attention to whether the temperature, humidity, and oxygen concentration in the incubator meet the requirements, as well as whether the air is clean;

7. After the operation is completed, the incubator should be cleaned in a timely manner and the bacteria inside the incubator should be disinfected;

8. After the operation is completed, timely remove protective equipment such as masks and gloves, and put the power cord, plug, electrical appliances, etc. back in place.

2、 Operating Steps

1. Open the incubator and place the bacterial culture medium;

2. Check the temperature, humidity, and oxygen concentration in the incubator and adjust them to meet the requirements;

3. Place the bacteria in the culture medium and shake well;

4. Place the culture medium in the incubator and adjust the temperature, humidity, and oxygen concentration;

5. Place the culture medium in the incubator and adjust the temperature, humidity, and oxygen concentration;

6. Place the control tube to control the temperature, humidity, and oxygen concentration in the incubator;

7. Regularly observe the temperature, humidity, oxygen concentration, and bacterial growth in the incubator;

8. After the operation is completed, timely close the incubator, clean the incubator, and disinfect the bacteria inside the incubator.

3、 Precautions

1. When operating a mold incubator, it is necessary to wear laboratory clothing and protective equipment such as masks and gloves;

2. During operation, ensure that the temperature, humidity, and oxygen concentration in the incubator meet the requirements, and that the air is clean;

3. After the operation is completed, the incubator should be cleaned in a timely manner and the bacteria inside the incubator should be disinfected;

4. After the operation is completed, timely remove protective equipment such as masks and gloves, and put the power cord, plug, electrical appliances, etc. back in place.

5. When operating a mold incubator, it is important to pay attention to the cleanliness of the laboratory to avoid bacterial contamination;

6. Ensure that the temperature, humidity, and oxygen concentration in the incubator meet the requirements, and that the air is clean;

7. When operating, pay attention to the operation of the control tube to avoid accidents;

8. Check the Electrical safety of the incubator regularly to avoid danger.