Model: mj-500-i
Volume: 500L
Power: 1500W
Ambient temperature: 5 ~ 35 ° C
Temperature range: 0 ~ 65 ° C
Temperature resolution: 0.1 ° C
Temperature uniformity: ± 1.5 ° C (25 ° C at test point)
Temperature fluctuation: high temperature ± 0.5 ° C, low temperature ± 1 ° C
Power supply: 220V 50Hz
Inner tank size (mm): 640x600x1400
Overall dimension (mm): 740x810x1860
Timing range: 1-9999min
Load carrier: 4 (pieces) (standard configuration)
- Product Details
- Product manual
Product use
MJ series mold incubator is a high-precision constant temperature equipment with refrigeration and heating control. It is a constant temperature culture device for bacterial and mold microbial culture test. It is an ideal equipment for scientific research and production in the fields of bioengineering, medical research, health and epidemic prevention, environmental protection, drug inspection, animal husbandry, aquatic products, colleges and universities, water body and BOD determination, plant cultivation and preservation.
Product features
1. The box body is made of high-quality steel plate, with plastic sprayed surface. The inner tank is made of mirror stainless steel, four corners and half arcs, which is easy to clean. The shelf spacing in the box is adjustable, and the outer door is equipped with observation window or toughened inner glass double-layer door;
2. Microcomputer intelligent liquid crystal temperature controller, PID controller and touch key display the set temperature and temperature in the box at the same time. The temperature control accuracy is reliable, with timing function, over temperature and over-current, and display safety protection audible and visual alarm at the same time;
3. Green products, environmental protection, compressor, fluorine-free refrigeration, high efficiency, low energy consumption, promoting energy conservation;
4. The air blower is composed of a reasonable and advanced temperature circulation system, so that the temperature in the box is uniform and the fan speed can be controlled automatically;
5. There is a lighting lamp in the box to observe the culture in the box (the mold culture box is equipped with ultraviolet lamp);
6. BOD is equipped with power socket (optional);
7. An independent temperature limit alarm system is set to automatically interrupt when the temperature exceeds the limit, so as to ensure the safe operation of the experiment without accidents (optional);