Model: lrh-160da
Volume: 160L
Refrigeration system: optional
Ambient temperature: 5 ~ 35 °
Temperature range: A: - 20 ~ 65 ℃
Temperature resolution: 0.1 ℃
Temperature uniformity: ± 2 ℃
Temperature fluctuation: high temperature ± 0.5 ℃ low temperature ± 1 ℃
Power supply: ~ 220V 50Hz
Power: 700W
Inner tank size mm: 440 × four hundred and eighty × seven hundred and ninety
Overall dimension mm: 600 × seven hundred and twenty × one thousand four hundred and forty
Load carrier: 3 (pieces) (standard configuration)
Timing range: 1-9999min
- Product Details
- Product manual
Scope of application
This product is suitable for research, University experiment and production departments of environmental protection, health and epidemic prevention, agriculture and livestock, drug inspection, aquatic products, etc. It is a special low-temperature equipment for serum culture, medicine and microbial culture environment test.
Product features
1. Microcomputer intelligent LCD controller, with timing, over temperature, over-current, power failure, alarm and safety protection functions;
2. Compressors and circulating fans, environment-friendly fluorine-free refrigerants, reasonable evaporative condenser system, fast refrigeration, high efficiency, low energy consumption and long service life;
3. Double door structure is adopted, and the inner door is tempered glass door with good thermal insulation performance. Mirror stainless steel liner, four corners and half arc, easy to clean the box, and the shelf can be adjusted;
4. An independent temperature limit alarm system is set to automatically interrupt when the temperature exceeds the limit, so as to ensure the safe operation of the experiment and avoid accidents (optional);
5. It has RS-485 interface, can connect printer and computer, and can record the change state of temperature parameters (optional);
6. It can be set on the left side of the box Φ 25mm test hole to facilitate experimental operation and temperature measurement (optional);
7. An independent temperature limit alarm system is set to automatically interrupt when the temperature exceeds the limit, so as to ensure the safe operation of the experiment without accidents (optional);