Product features

1. Fuzzy PID controller, accurate temperature control, small fluctuation, with timing function, and the maximum time setting value is 99 hours and 59 minutes;

2. The forced convection air duct system can improve the temperature response speed, improve the temperature uniformity and reduce the temperature fluctuation;

3. There is a layer of glass door on the inner layer of the box door, which is convenient and clear for observation. When the glass door is opened, the breeze circulation and heating will stop automatically without the disadvantage of temperature overshoot;

4. Mirror stainless steel liner, electric heating tube heating mode, fast heating speed, so that the box can be heated evenly;

5. The independent temperature limit alarm system will automatically cut off when the temperature exceeds the limit, so as to ensure the safe operation of the experiment without accidents (optional);

6. It can be equipped with a printer or RS485 interface to connect the printer or computer and record the change of temperature parameters (optional);

7. The speed of the circulating fan can be controlled automatically. When the temperature in the box is at a constant temperature, the speed will decrease, and the circulating wind speed will be adjusted to the wind speed suitable for cell growth, so as to avoid sample volatilization due to excessive air volume during the test;

8. Multi segment liquid crystal programmable controller, multiple parameters are displayed on one screen, and the menu operation interface can simplify the complex test process and truly realize automatic control and operation;

9. Parameters such as multi-stage temperature, circulating wind speed, time and heating rate can be set and programmed at the same time, gradient control of temperature rise, slow heating from the initial temperature in the box and other functions, as well as automatic startup, standby and shutdown functions can be preset;

10. 7 groups of 63 steps can be preset and programmable, with 9 steps in each group, and the setting time of each group is 0 ~ 5999 minutes;

11. Independent temperature limit alarm system and audible and visual alarm to remind the operator to ensure safe operation without accidents (optional);

12. High or low temperature and over temperature alarm;

13. The interior of the box can be disinfected regularly, which can effectively kill the floating bacteria in the circulating air in the box, so as to effectively prevent pollution during cell culture;