Precautions and troubleshooting for using Shanghai Yetuo microcentrifuge

Micro centrifuge is a device used for centrifugal separation of samples. When using it, some precautions should be taken to ensure the smooth progress of the experiment and timely troubleshooting. Here are some suggestions:

Micro centrifuge - Precautions and troubleshooting for using micro centrifuges

Precautions for using a micro centrifuge:

Balanced sample: Ensure that the sample is evenly distributed inside the centrifuge tube when loading the sample tube to avoid vibration caused by imbalance.

Choose appropriate centrifugal force and time: Select appropriate centrifugal force and time according to experimental requirements to ensure separation efficiency and sample integrity.

Use appropriate centrifuge tubes: Use centrifuge tubes that are suitable for the centrifuge specifications to ensure that they can withstand the required centrifugal force.

Sealed centrifuge: When operating the centrifuge, ensure that all covers and seals are properly installed to prevent liquid leakage inside the centrifuge.

Check the balance of the centrifuge: Before each use, check the balance of the centrifuge to ensure that there are no foreign objects inside, and adjust the position of the centrifuge tube.

Be cautious when opening the centrifuge: After the centrifuge stops, wait for it to stop running before opening it again to avoid injury caused by movement.

Micro centrifuge - Precautions and troubleshooting for using micro centrifuges

Troubleshooting of Micro Centrifuge:

Centrifuge cannot start: Check if the power connection is normal. Ensure that the centrifuge door is closed. Check for power failure.

Excessive noise from centrifuge: Check for foreign objects inside the centrifuge, such as broken centrifuge tubes. Check the balance of the centrifuge to ensure even loading of the sample.

Unstable centrifuge speed: Check if the centrifuge base is stable. Ensure the uniformity of the sample inside the centrifuge tube. Check if there is any malfunction inside the centrifuge.

The centrifuge cannot reach the set speed: check if the correct speed and centrifugal force are selected. Check if the power supply of the centrifuge is stable. If it is a variable speed centrifuge, check for any speed adjustment faults.